Recon 200 Gen 2 - PlayStation Setup

This article details the best way to set your Recon 200 Gen 2 headset up for use with a PS4 or PS5 console.

PS4 SETUP

To set your headset up for use with a PS4 console, please do the following.

1. Go to Settings >> Sound >> Audio Output >> Output Device
2. Select Controller Headset for Output Device
3. Go to Settings >> Sound >> Volume >> Headphones
4. Set Volume Control (headphones) level to Maximum
5. Adjust your microphone levels by going to Settings >> Sound >> Microphone >> Adjust Mic Level >> Microphone Level

*As desired, go to Adjust 3D Audio Profile and enable the 3D Audio Function to enhance the audio through your headset.

PS5 SETUP

If you instead have a PS5 console, please do the following.

1. Plug the headset into the aux port in the DualSense controller. Once you do this, the microphone function will automatically switch from the controller’s integrated mic to your headset.
2. Go to Settings >> Sound >> Audio Output >> Output Device
   
   1. • Select Controller Headset for Output Device
      • Set Output to Headphones to All Audio
3. Go to Settings >> Sound >> Volume >> Headphones
   
   1. • Set Volume Control (headphones) level to Maximum
4. Adjust your microphone levels by going to Settings >> Sound >> Microphone >> Adjust Mic Level >> Microphone Level

*As desired, you can enable the 3D Audio function to enhance the audio through your headset. Then, go to Adjust 3D Audio Profile to select the best profile option for your game.