Stealth 600 Gen 2 Xbox - Quick Start Guide

You can download the Stealth 600 Gen 2 Xbox Quick Start Guide here.

You can also view the contents of that Quick Start Guide below.

PACKAGE CONTENTS

1. Stealth 600 Gen 2 Xbox Headset (A)
2. USB-C Charge Cable (B)

IMPORTANT

Please make sure your headset is updated with the latest firmware.

Connect to the Turtle Beach Audio Hub for Windows or Mac to update the firmware.

HEADSET CONTROLS

1. LED Indication
   • See legend
2. USB Charge & Update Port
3. Connect Button
4. Power Button
   • Press (1s) - Power On/Off
   • Press - Superhuman Hearing On/Off
5. Mode Button
   • Cycle through audio presets
6. Chat Volume
7. Game Volume

Use Superhuman Hearing Mode to pinpoint quiet audio cues like enemy footsteps and weapons reloads. 

During gameplay, you can activate and deactivate Superhuman Hearing by pressing the POWER button once, quickly.

Flip up microphone to mute. There is an audible tone when the mic is muted or unmuted.

To cycle through EQ Audio Presets, press the Mode button. EQ Presets include:

1. Signature Sound
2. Bass Boost
3. Bass + Treble Boost
4. Vocal Boost

COMPATIBILITY

This headset is compatible for use with 

1. Xbox Series X
2. Xbox One
3. Windows 10 with Xbox Adapter (sold separately)

SETUP FOR XBOX USE

CONSOLE SETUP

To set your headset up for use with an Xbox One console, please do the following:

1. Power on both the headset and the console. The LEDs should light up.

2. Press the Enroll button on the Xbox console until it blinks rapidly. Then, press and hold the Connect button on the headset, until the LED on the headset begins to flash rapidly as well.

3. Within a couple of seconds, the headset and console LEDs will turn solid, indicating that the headset and console have been paired.

SURROUND SOUND FOR XBOX (ONLY AVAILABLE ON XBOX)

1. Go to Settings >> General >> Volume & Audio Output
2. Set Headset Audio to Windows Sonic for Headphones

CHARGING

The Stealth 600 Gen 2 Xbox headset gives you 15 hours of rechargeable battery life. Make sure to charge it regularly before storing.

Headset Storage

Always charge your headset before storing it for any extended period of time (greater than 3 months). Never store the unit in temperatures above 113°F/45°C.

HEADSET LED

The behavior of the headset LED will indicate charging and pairing status, as detailed in the following chart:

SETUP FOR PC USE

SYNCING YOUR HEADSET
(XBOX WIRELESS ADAPTER)*
*Xbox Wireless Adapter not included.

1. Plug the Xbox Wireless Adapter into a free USB port on the computer.

Then, power the headset on by pressing and holding the Power button down.

2. Press and hold the Enroll button on the Adapter until the LED on the Adapter flashes. Then, press and hold the Connect button on the headset until the LED on the headset flashes.

3. Within a few seconds, the LEDs on both the headset and the Adapter will turn solid, indicating the headset and Adapter have been successfully synced.

PLEASE NOTE: The Xbox Wireless Adapter is not included with the headset purchase, and is sold separately. In addition: When used on a PC, the headset volume is controlled through Windows 10. The volume controls on the headset will have no effect.

SYNCING YOUR HEADSET
(BUILT-IN XBOX WIRELESS)

1. On your PC, go to Settings >> Devices >> Connected Devices.
   • Choose Add A Device. Windows will search for the headset.
2. Press and hold the Connect button on the headset until the LED on the headset flashes rapidly. Windows will find and add the headset.
3. When your Stealth 600 headset appears in the list under Other Devices, it is ready to use.

CONFIGURING YOUR SETTINGS

1. On the Windows Taskbar, right-click the Speaker icon and select "Sounds". From there, go to the Playback tab of that window.
2. Set TURTLE BEACH Stealth 600 as your default device.
3. Go to the Recording tab of that window.
4. Set TURTLE BEACH Stealth 600 as your default device.