Stealth 600 for Xbox One - Turtle Beach Audio Hub - Update Firmware and Customize Controls

It is important to always run the most up-to-date firmware in order to enjoy the best audio experience.

The Turtle Beach Audio Hub will automatically check for the newest firmware and install the newest version if available.

The Turtle Beach Audio Hub is available for Windows and Mac.

1. Connect your Stealth 600 for Xbox One to your PC/Mac using the included USB Cable.
2. Open the Turtle Beach Audio Hub app

At this point if your headset requires a new update you will be prompted to begin this process.

**Note: This process may take a couple minutes. Do not disconnect your headset until the process is complete.**

Once the process is complete enroll your headset with your Xbox One.  The update process erases the Xbox Wireless connection so it is essential that this step is taken.  Detailed Steps available here.

Now you are able to adjust some of your Stealth 600 for Xbox One settings.

Mic Monitor - This setting allows you to control how loud you hear yourself in the headset.  If this is turned down all the way you will not hear your own voice at all, while if you turn it up all the way you will hear your voice loudly through the headset.  When wearing over-ear style headphones this helps prevent you from yelling.  If this setting is turned up to the maximum level you may also hear some ambient noise from other sources of sound in your room.

Tones - This setting controls how loud the indication tones you hear in your headset play.  These are tones that play when toggling your EQ Presets, Superhuman Hearing, and when Powering On/Off. If this is set to the minimum you will not hear any indication tones.

The information screen displays some essential details that may be needed when troubleshooting an issue or talking with Customer Support.  The links lead to the Support section of the Turtle Beach website. (Which you are currently reading right now!)

Newest Firmware: